NEOPORM® foam glass

Foamed glass NEOPORM® (foam glass) -
rigid insulating material with closed cellular structure
a structure obtained from foamed glass.

Why foam glass NEOPORM is better than its counterparts?

Glass wool and polystyrene contain organic compounds,
therefore in 5-10 years become not only unsuitable,
but also simply are dangerous.

The glass wool is rotting, and the foam is crumbling into dust.

Safety

It is harmless. At all.

In production

In storage

In exploitation

In recycling

Has no
restrictions
on the use

Foam glass NEOPORM® does not contain polymers and mineral fibers, does not burn, does not absorb water, is vapor-tight, does not remove under load, does not collapse under the action of solvents, water or sunlight.

Properties of
NEOPORM®
foam glass

Low thermal conductivity

Absolute fire safety

Class КМ 0

Non-toxic

Does not contain toxic binders.

Does not contain mineral fibers

Does not contain or emit toxic substances.

High strength

Resistant to the action of chemical reagents, oxidants and solvents.

Resistant to rodents.

Not absorbed and does not accumulate moisture

Does not promote the development of mold and microorganisms due to moisture.

Does not cause corrosion damage of metal.

Energy Efficiency

Below the level of low power consumption

18-20

kWt-h/m² per year

NEOPORM® production

40% cheaper than

imported analogues

Longevity

100 years warranty. This is not a typo.

Unlike other thermal insulation materials, rigid and non-permeable foam glass NEOPORM® can be used for the entire life of a thermally insulated object without the need for scheduled repairs and disposal of the failed thermal insulation.

During

100 years warranty:

No need to replace and dispose of thermal insulation

The heat loss and energy costs are kept to a minimum

Excludes overhaul of thermal protection systems

Usage

Widely applicable in construction and utilities

Main purpose:

significant reduction in energy consumption of buildings and structures, ease of installation, durability and safety for humans and structures, improving energy efficiency and reliability of equipment and pipelines.

Perfect fit
for corrosive liquids

A unique combination of absolute incombustibility and the ability not to absorb and miss any kinds of gases, vapors and liquids makes NEOPOPM® foam glass an ideal thermal insulation for storages and pipelines transporting oil, natural gas, as well as corrosive liquids.

Withstands
from -260ºС to +485ºС

Foam glass NEOPORM® is suitable for thermal insulation of industrial equipment operating at temperatures from -260ºС to + 485ºС, as well as in the construction of industrial buildings.

Characteristics

Foam glass NEOPORM® grades D130 and D150

Mark according to density	D 130	D 150
Density, kg/m³	121-140	141-160
Compressive strength, mPa, not less than	1,0	2,0
Thermal conductivity at a temperature of 25°C, W/(m·K)	0,052	0,048

The graph of the heat conductivity versus the temperature of the neoprene NEOPORM® brand D 130

The ratio of thermal conductivity to temperature (ASTM C1045, p. X3.3.1):

λ_(t)=0.0443+1.421·10^-4·t+1.46·10^-7·t²+2·10^-10·t³

The values of thermal conductivity as a function of temperature (ASTM C177, C1045).

The values were determined in isolation by calculating the polynomial at an average temperature

t, ºС	-200	-150	-100	-50	0	10	25	50
λ, W/(m·K)	0.0201	0.0256	0.0314	0.0375	0.0443	0.0457	0.0479	0.0518

t, ºС	100	150	200	250	300	350	400	450
λ, W/(m·K)	0.0602	0.0802	0.0802	0.0921	0.1055	0.1205	0.1373	0.1560

Thermal insulation from NEOPORM^® foam glass

Insulating
panels

Shaped
articles

Insulating
rubble

	214013, Russia, Smolensk, Nikolaeva str., 87, room structure 7, office 16
	ooowayenergy@gmail.com